CCNA Wireless

  • Cisco Certified Network Associate in Wireless is a Cisco International Certification to work in Small to Medium Size Enterprise Wi-Fi Networks. Following Exam need to clear this Certification:

    CCNA Wireless: 640-722 IUWNE

    Course Curriculum

    CCNA Wireless

    • Implementing Cisco Unified Wireless Networking Essentials (IUWNE)
    • Describe basics of spread spectrum technology
  • Describe the impact of various wireless technologies (Bluetooth, WiMAX, ZigBee, and cordless phone)
  • Describe Wireless LAN (WLAN) RF principles (antenna types, RF gain/loss, Effective Isotropic Radiated Power (EIRP), refraction, reflection
  • Describe networking technologies used in wireless (SSID to WLAN_ID to Interface to VLAN, 802.1q trunking
  • Describe 802.11 authentication and encryption methods (Open, Shared, 802.1X, EAP, TKIP, and AES)
  • Identify the components of the Cisco Unified Wireless Network architecture (Split MAC, LWAPP, stand-alone AP vs controller-based AP, specific hardware examples)
  • Install and configure autonomous access points in the small business environment
  • Describe controller-based AP discovery and association (DHCP, DNS, Master-Controller, Primary-Secondary-Tertiary, and n+1 redundancy)
  • Verify basic wireless network operation
  • Describe client WLAN configuration requirements, such as Service Set Identifier (SSID), security selection, and authentication
  • Describe the general framework of wireless security and security components (authentication, encryption, MFP, IPS)
  • Describe and configure authentication methods (Guest, PSK, 802.1X, WPA/WPA2 with EAP- TLS, EAP-FAST, PEAP, LEAP)
  • Describe and configure encryption methods (WPA/WPA2 with TKIP, AES)
  • Configure controllers and access points (APs) (using the Configuration tab not templates)
  • Use preconfigured maps in the WCS (adding/relocating/removing access points, turn on/off heat maps, view client location, and view CleanAir zones of influence)
  • Identify and use basic WLAN troubleshooting tools (WLC show debug and logging) for client to AP connectivity, AP to controller connectivity
  • Transfer logs, configuration files, and O/S images to and from the WLC via the GUI
  • Differentiate and use WLC and AP (autonomous and LAP) management access methods (console port, CLI, telnet, ssh, http, https, and wired vs wireless management)

ZCC provides best CCNA Wireless Training in Chandigarh. ZCC Labs are equipped with more than 20 routers, 12 switches & Pix Firewalls, 6 AP’s, 2 AR’s, Various Antennas for 100% Practical’s.

Books Recommended

CCNA Wireless: 640-722 Official Certification Guide

Projects / Lab Gallery
Project Videos

What else can we do to convince you?

Apply For Training

zcc-14yrs-iso-job-web